Drum Washing Nozzles and Tote Washing Nozzles

Washing or rinsing the inside or exterior of a drum or tote to allow for safe return, re-use, or disposal.


Drums, totes (IBC = intermediate bulk container), and other medium sized containers are frequently used for the storage and transportation of a variety of products, including food products, beverages, oils, chemical solutions, and fertilizers among many others. Drums are typically 5 to 55 gallons capacity while IBC totes are typically 180 gallons to 550 gallons capacity. These containers generally need to undergo an internal wash process prior to use to ensure sanitation and prevent product contamination or after use to remove old product and residues, making the container safe for return, re-use or disposal. Drums and totes may also require a rinse or wash of the exterior of the container to remove product or foam that may have spilled over during the filling process. Spray nozzles can help to maximize the efficiency of washing applications by ensuring proper distribution of the cleaning media and/or maximizing impact from the available flow rate/pressure of the system, reducing operating and disposal costs.

Download the Bottle, Drum & Tank Washing brochure (PDF - 3MB)

Download the SI/METRIC Bottle, Drum & Tank Washing brochure (PDF - 3MB)
 

Selecting a Drum and Tote Washing Nozzle:

Important factors to consider:

  • Container size and shape
  • Application details and requirements
    • Residue to be removed
      • Rinsing
      • Soluble with water, soaps, detergents, or other chemicals
      • High impact washing required for removal
    • Temperature and chemical composition of wash fluid
      • Required materials of construction for corrosive residues and spray media
    • Interior vs exterior wash
      • Interior: Available container opening sizes
      • Exterior: Available nozzle mounting locations
    • Closed vs. open top containers
  • Available/required flow rate
    • Achieve effective washing while minimize costs of treating or disposing of wastewater
  • Available pressure drop (∆P) across the nozzle
    • ∆P = supply pressure at nozzle inlet - process pressure outside nozzle
  • Our experienced engineers can help determine which nozzle will perform as required with your design details

Common Drum and Tote Washing Nozzle Uses and Industries:

HydroWhirl Orbitor 100

  • Specifically geared to provide quick wash cycles of small to medium totes and tanks for efficient use of resources and minimizing waste
  • Fits through a 4" (100 mm) opening
  • Tank washing machine with high impact jets
  • Minimum moving parts to extend operating life
  • Easily field serviced to reduce downtime maintenance costs
  • Available with ATEX certification
Nozzle Type(s):
Rotating - Gear Driven
  • Tank washing machines (TWM) / rotating jet machines provide maximum impact / impingement for hard to clean residues
Spray Pattern(s):
Tank Washing
Flow Range:
11.8 to 52.2 gpm
Typical Pressure Range:
45 to 145 psi
Angle Range:
360°
Common Materials:
316L

Tank Washing

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
45 psi 60 psi 90 psi 100 psi 130 psi 145 psi
HWO100 4x3.0 3/4″, 1″ 360° 11.8 14.0 17.8 19.0 22.1 23.6
HWO100 4x3.0-ATEX 3/4″, 1″ 360° 12.3 14.4 17.8 18.8 21.6 22.9
HWO100 4x4.0-ATEX 3/4″, 1″ 360° 16.4 19.3 24.3 25.8 29.9 31.8
HWO100 4x4.0 3/4″, 1″ 360° 17.4 20.4 25.4 26.8 30.9 32.8
HWO100 4x5.0 3/4″, 1″ 360° 23.4 26.8 32.6 34.3 39.0 41.1
HWO100 4x5.0-ATEX 3/4″, 1″ 360° 23.8 27.1 32.5 34.1 38.4 40.4
HWO100 4x6.0 3/4″, 1″ 360° 29.9 34.1 41.2 43.2 48.8 51.3
HWO100 4x6.0-ATEX 3/4″, 1″ 360° 29.9 34.1 41.2 43.2 48.8 51.3

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

HydroWhirl S

  • Dual bearing track design allows for operation in any orientation
  • Uses less water than static spray balls
  • Constructed completely of 316 stainless steel
  • Available with ATEX approval for Zone 0
Nozzle Type(s):
Rotating - Free Spinning
  • Rotating spray balls provide even 360° even coverage, while sweeping fans increase washing effectiveness, for efficient washing of drum / tote interiors
Spray Pattern(s):
Tank Washing
Flow Range:
5.53 to 41.1 gpm
Typical Pressure Range:
20 to 50 psi
Angle Range:
360°
Common Materials:
316L / 316

Tank Washing

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
10 psi 20 psi 30 psi 40 psi 50 psi 60 psi
HWS 30 1/4″, 3/8″, 1/2″,
3/8″ tube,
1/2″ tube,
3/4″ tube,
DN10 tube,
DN15 tube
360° 5.70 8.13 10.0 11.6 13.0 14.2
HWS 40-7.5 1/2″, 3/4″, 1″,
3/4″ tube,
1″ tube,
DN15 tube,
DN20 tube,
DN25 tube
360° 5.60 7.89 9.64 11.1 12.4 13.6
HWS 40-8 1/2″, 3/4″, 1″,
3/4″ tube,
1″ tube,
DN15 tube,
DN20 tube,
DN25 tube
360° 6.39 8.98 11.0 12.6 14.1 15.4
HWS 40-9 1/2″, 3/4″, 1″,
3/4″ tube,
1″ tube,
DN15 tube,
DN20 tube,
DN25 tube
360° 7.96 11.3 13.8 16.0 17.9 19.6
HWS 30-6 1/4″, 3/8″, 1/2″,
3/8″ tube,
1/2″ tube,
3/4″ tube,
DN10 tube,
DN15 tube
360° 5.53 6.96 7.98 8.78 9.46 10.1
HWS 40 1/2″, 3/4″, 1″,
3/4″ tube,
1″ tube,
DN15 tube,
DN20 tube,
DN25 tube
360° 9.20 13.0 15.9 18.3 20.5 22.4
HWS 40HF-11 1/2″, 3/4″, 1″,
3/4″ tube,
1″ tube,
DN15 tube,
DN20 tube,
DN25 tube
360° 12.2 17.1 20.9 24.1 26.9 29.4
HWS 40HF 1/2″, 3/4″, 1″,
3/4″ tube,
1″ tube,
DN15 tube,
DN20 tube,
DN25 tube
360° 15.2 21.2 25.7 29.5 32.8 35.8

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

HydroWhirl Poseidon

  • Slow, controlled rotation maximizes impact from a rotating spray ball design
  • Slow rotation results in longer dwell time on the target for improved cleaning
  • Constructed completely of PTFE
Nozzle Type(s):
Rotating - Controlled Spin
  • Rotating spray balls provide even 360° even coverage, while sweeping fans increase washing effectiveness, for efficient washing of drum / tote interiors
Spray Pattern(s):
Tank Washing
Flow Range:
4.45 to 43.9 gpm
Typical Pressure Range:
20 to 60 psi
Angle Range:
360°
Common Materials:
PTFE
  • PTFE material is ideal for chemical resistance
  • Polymer material won't scratch or damage bottles during insertion or removal

Tank Washing

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
10 psi 20 psi 30 psi 40 psi 50 psi 60 psi
HWP 10 1/4″, 3/8″, 1/2″,
1/2″ tube,
3/4″ tube,
DN10 tube,
DN15 tube
360° 4.44 6.30 7.73 8.93 10.0 11.0
HWP 23 3/8″, 1/2″, 3/4″,
3/4″ tube,
1″ tube,
DN15 tube,
DN20 tube
360° 9.42 13.4 16.4 19.0 21.3 23.4
HWP 28 3/8″, 1/2″, 3/4″,
3/4″ tube,
1″ tube,
DN15 tube,
DN20 tube
360° 10.7 15.2 18.6 21.5 24.1 26.4
HWP 32 1/2″, 3/4″, 1″,
1″ tube,
1 1/4″ tube,
DN20 tube,
DN25 tube
360° 11.7 16.8 20.8 24.1 27.1 29.8
HWP 37 1/2″, 3/4″, 1″,
1″ tube,
1 1/4″ tube,
DN20 tube,
DN25 tube
360° 15.1 21.5 26.5 30.8 34.5 37.9

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

HydroClaw

  • Well-suited to recirculated liquid and/or containers with large particulates
  • Clog resistant design with no moving parts
  • Allows passage of particles over 1/4 in [6 mm] in diameter, three times larger than a sprayball
  • Made of FDA compliant 316L stainless steel
  • Self-draining and self-flushing
Nozzle Type(s):
Deflector
Spray Pattern(s):
Tank Washing
Flow Range:
70.6 to 112 gpm
Typical Pressure Range:
25 to 40 psi
Angle Range:
360°
Common Materials:
316L

Tank Washing

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
20 psi 25 psi 30 psi 35 psi 40 psi
HC 100 THREAD 1″ 360° 70.6 79.0 86.5 93.5 100
HC 100 CLIP-ON 1″,
1 1/2″ tube,
DN40 tube
360° 79.0 88.4 96.9 105 112

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

TW

  • Unique washing spiral design provides 180° to 270° of coverage with minimal clearance diameter and maximum clog resistance
  • Compact physical design that fits through small openings
  • Sprays backward as well as forward
  • Great for washing carboys and similar tanks
Nozzle Type(s):
Spiral
  • Spiral nozzles are a compact, rugged, one-piece design- providing unparalleled clog resistance with no internal vanes or components
Spray Pattern(s):
Tank Washing
Flow Range:
3.00 to 36.9 gpm
Typical Pressure Range:
20 to 50 psi
Angle Range:
180 - 270°
Common Materials:
316

Tank Washing

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
10 psi 20 psi 40 psi 50 psi 60 psi 100 psi
TW 12 3/8″ 180°, 270° 3.00 4.24 6.00 6.71 7.35 9.49
TW 14 3/8″ 180°, 270° 4.05 5.72 8.10 9.05 9.91 12.8
TW 16 3/8″ 180°, 270° 5.31 7.51 10.6 11.9 13.0 16.8
TW 20 3/8″ 180°, 270° 8.25 11.7 16.5 18.5 20.2 26.1

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

NF

  • Durable one-piece construction
  • High impact
  • Axial spray design with no internal components provides flexible and clog resistant design for almost any application
Nozzle Type(s):
Fan
  • Flat fan nozzles concentrate the spray media to provide the most impact for washing bottle exteriors
Spray Pattern(s):
Fan
Flow Range:
.353 to 35.3 gpm
Typical Pressure Range:
20 to 100 psi
Angle Range:
50 - 90°
Common Materials:
PVC, Polypropylene, PTFE, 303, 316

Fan

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
5 psi 20 psi 40 psi 100 psi 200 psi 400 psi
NF 10 1/8″, 1/4″, 3/8″ 50°, 65°, 80°, 90° .353 .707 .999 1.58 2.23 3.16
NF 15 1/8″, 1/4″, 3/8″ 50°, 65°, 80°, 90° .530 1.06 1.50 2.37 3.35 4.74
NF 20 1/8″, 1/4″, 3/8″ 50°, 65°, 80°, 90° .707 1.41 2.00 3.16 4.47 6.32
NF 30 1/8″, 1/4″, 3/8″ 50°, 65°, 80°, 90° 1.06 2.12 3.00 4.74 6.70 9.48
NF 40 1/8″, 1/4″, 3/8″ 50°, 65°, 80°, 90° 1.41 2.83 4.00 6.32 8.94 12.6
NF 50 1/4″, 3/8″ 50°, 65°, 80°, 90° 1.77 3.54 5.00 7.91 11.2 15.8
NF 60 1/4″, 3/8″, 1/2″ 50°, 65°, 80°, 90° 2.12 4.24 6.00 9.49 13.4 19.0
NF 70 1/4″, 3/8″, 1/2″ 50°, 65°, 80°, 90° 2.48 4.96 7.02 11.1 15.7 22.2
NF 80 3/8″, 1/2″ 50°, 65°, 80°, 90° 2.82 5.63 7.97 12.6 17.8 25.2
NF 90 3/8″, 1/2″ 50°, 65°, 80°, 90° 3.18 6.35 8.98 14.2 20.1 28.4
NF 100 3/8″, 1/2″ 50°, 65°, 80°, 90° 3.53 7.07 9.99 15.8 22.3 31.6

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

MPL

  • BETE's unique, clog resistant S-vane design gives the MaxiPass L the largest free passage available for a given flow rate, making it resistant to clogging, efficient, and reliable
  • Easily handles liquids with high particulate concentrations
  • High reliability spray performance under the most difficult conditions
  • Lower flow rates than MaxiPass series
Nozzle Type(s):
Whirl
  • Axial whirl nozzles provide even coverage and wide coverage areas for efficient bottle exterior washing / rinsing
Spray Pattern(s):
Full Cone
Flow Range:
.086 to 3.02 gpm
Typical Pressure Range:
20 to 80 psi
Angle Range:
50 - 135°
Common Materials:
303, 316

Full Cone

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
10 psi 20 psi 40 psi 50 psi 60 psi 80 psi
MPL 0.21 1/8″ 51°, 77°, 129° .116 .156 .210 .231 .250 .283
MPL 0.30 1/8″ 53°, 86°, 134° .164 .221 .298 .328 .355 .401
MPL 0.42 1/8″ 51°, 90°, 128° .231 .312 .420 .462 .500 .566
MPL 0.57 1/8″ 61°, 92°, 127° .315 .424 .572 .629 .680 .770
MPL 0.77 1/4″ 62°, 90°, 125° .425 .573 .772 .850 .919 1.04
MPL 1.12 1/4″ 60°, 92°, 124° .616 .830 1.12 1.23 1.33 1.51
MPL 1.51 1/4″ 70°, 97°, 123° .832 1.12 1.51 1.66 1.80 2.03

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

WL

  • Versatile whirl nozzle in a variety of flow rates, spray angles, and materials
  • Whirl vane design produces very uniform coverage
Nozzle Type(s):
Whirl
  • Axial whirl nozzles provide even coverage and wide coverage areas for efficient bottle exterior washing / rinsing
Spray Pattern(s):
Full Cone
Flow Range:
.094 to 23.0 gpm
Typical Pressure Range:
20 to 100 psi
Angle Range:
60 - 120°
Common Materials:
PVC, Polypropylene, PTFE, 303, 316

Full Cone

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
10 psi 20 psi 40 psi 100 psi 200 psi 400 psi
WL 1/4 1/8″ 60°, 90°, 120° .130 .180 .249 .383 .531 .735
WL 1/2 1/8″ 60°, 90°, 120° .260 .360 .498 .766 1.06 1.47
WL 3/4 1/8″ 60°, 90°, 120° .390 .540 .747 1.15 1.59 2.21
WL 1 1/4″ 60°, 90°, 120° .522 .724 1.00 1.54 2.14 2.96
WL 1 1/2 1/4″ 60°, 90°, 120° .782 1.08 1.50 2.31 3.20 4.43
WL 2 3/8″ 60°, 90°, 120° 1.04 1.44 2.00 3.07 4.26 5.90
WL 3 3/8″ 60°, 90°, 120° 1.56 2.17 3.00 4.62 6.39 8.86
WL 4 3/8″ 60°, 90°, 120° 2.08 2.89 4.00 6.15 8.52 11.8
WL 5 1/2″ 60°, 90°, 120° 2.61 3.61 5.00 7.69 10.7 14.8
WL 6 1/2″ 60°, 90°, 120° 3.13 4.33 6.00 9.23 12.8 17.7
WL 7 1/2″ 60°, 90°, 120° 3.66 5.07 7.02 10.8 15.0 20.7

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.