Roll Cooling & Lubrication Nozzles

Cooling & lubricating mill rolls used for the production of steel and aluminum


BETE offers a variety of high-quality, flat fan nozzles that are useful for roll lubrication and cooling applications in steel and aluminum mills. Our nozzles can spray water or oil-based coolants along the rollers during the manufacturing process.

Selecting a Roll Cooling Nozzle:

Important factors to consider:

  • Required coverage
  • Spray media density and viscosity
  • Ease of maintenance/replacement
  • Available nozzle mounting locations
  • Available and required flow rate
  • Available pressure drop (∆P) across the nozzle
    • ∆P = supply pressure at nozzle inlet - process pressure outside nozzle
  • Our experienced engineers can help determine which nozzle will perform as required with your design details

EZNF

  • Interchangeable spray tips
  • Nozzle tips can be changed in seconds without tools
  • Automatic alignment
Nozzle Type(s):
Fan
Spray Pattern(s):
Fan
Flow Range:
.177 to 10.6 gpm
Typical Pressure Range:
10 to 100 psi
Angle Range:
60 - 120°
Common Materials:
303, 316

Fan

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
5 psi 20 psi 40 psi 80 psi 100 psi 200 psi
EZNF 05 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 90°, 110°, 120° .177 .354 .500 .707 .791 1.12
EZNF 06 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 90°, 110°, 120° .212 .424 .600 .849 .949 1.34
EZNF 08 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 90°, 110°, 120° .282 .563 .797 1.13 1.26 1.78
EZNF 10 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 90°, 110°, 120° .353 .707 .999 1.41 1.58 2.23
EZNF 15 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 90°, 110°, 120° .530 1.06 1.50 2.12 2.37 3.35
EZNF 20 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 90°, 110°, 120° .707 1.41 2.00 2.83 3.16 4.47
EZNF 30 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 90°, 110°, 120° 1.06 2.12 3.00 4.24 4.74 6.70

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

NFD

  • The NFD series of flat fan nozzles has a dovetail joint that allows for easy maintenance and repeatable alignment
  • Interchangeable spray tips
Nozzle Type(s):
Fan
Spray Pattern(s):
Fan
Flow Range:
.174 to 10.9 gpm
Typical Pressure Range:
10 to 100 psi
Angle Range:
60 - 120°
Common Materials:
303, 316

Fan

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
5 psi 20 psi 40 psi 100 psi 200 psi 400 psi
NFD 050 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .174 .349 .493 .780 1.10 1.56
NFD 059 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .208 .416 .588 .930 1.32 1.86
NFD 077 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .273 .546 .772 1.22 1.73 2.44
NFD 097 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .344 .689 .974 1.54 2.18 3.08
NFD 12 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .438 .877 1.24 1.96 2.77 3.92
NFD 15 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .521 1.04 1.47 2.33 3.30 4.66
NFD 20 3/4″ 60°, 90°, 120° .691 1.38 1.95 3.09 4.37 6.18
NFD 25 3/4″ 60°, 90°, 120° .877 1.75 2.48 3.92 5.54 7.84
NFD 31 3/4″ 60°, 90°, 120° 1.09 2.18 3.09 4.88 6.90 9.76

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

HydroPulse

  • Features a pneumatic shut-off / clean-out. When coupled with a control system, these nozzles can reduce product waste by turning off and on when needed
  • Interchangeable spray tips
  • Pneumatic actuation for crisp on/off spray
  • Straight-through porting for series setup
  • Variety of mounting brackets available
Nozzle Type(s):
Fan
Spray Pattern(s):
Fan
Flow Range:
.177 to 5.30 gpm
Typical Pressure Range:
10 to 100 psi
Angle Range:
60 - 120°
Common Materials:
303

Fan

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
5 psi 20 psi 40 psi 100 psi 300 psi 500 psi
HP 05 1/8″, 1/4″ 65°, 80°, 95°, 110° .177 .354 .500 .791 1.37 1.77
HP 06 1/8″, 1/4″ 65°, 80°, 95°, 110° .212 .424 .600 .949 1.64 2.12
HP 0616 1/8″, 1/4″ 73° .218 .436 .616 .974 1.69 2.18
HP 077 1/8″, 1/4″ 73° .273 .546 .772 1.22 2.11 2.73
HP 08 1/8″, 1/4″ 65°, 80°, 95°, 110° .284 .568 .803 1.27 2.20 2.84
HP 0924 1/8″, 1/4″ 73° .331 .662 .936 1.48 2.56 3.31
HP 10 1/8″, 1/4″ 65°, 80°, 95°, 110° .353 .707 .999 1.58 2.74 3.53
HP 15 1/8″, 1/4″ 65°, 80°, 95°, 110° .530 1.06 1.50 2.37 4.10 5.30

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.