Lubrication Nozzles

Lubricate material during machining, conveyors, rollers, presses, dies, and other moving machine components


Proper lubrication can help save time, energy, and money by reducing friction, improving performance, and increasing service life of machines and tooling used in a wide variety of industries. Many pieces of high-end equipment require very specific lubrication to critical components and parts to ensure proper operation. Spray nozzles are capable of providing the accurate application of a wide variety of lubricants in the precise amounts/coverage densities necessary in these critical applications. BETE has years of experience in selecting nozzles to apply lubricants of all densities and viscosities with the throw and coverage necessary to cover critical machinery parts, tooling, and products during manufacturing processes.

Selecting a Lubrication Nozzle:

Important factors to consider:

  • Required coverage
  • Spray media density and viscosity
  • Ease of maintenance/replacement
  • Available nozzle mounting locations andrequired nozzle throw
  • Available/required flow rate and coverage densities
  • Available pressure drop (∆P) across the nozzle
    • ∆P = supply pressure at nozzle inlet - process pressure outside nozzle
  • Our experienced engineers can help determine which nozzle will perform as required with your design details

Common Lubrication Nozzle Uses and Industries:

NFV

  • No internal components
  • High impact
  • Optional removable strainer for maximum clog resistance
Nozzle Type(s):
Fan
  • Fan nozzles can provide a wide variety of lubrication coverage options from straight-jets for precise application points or wide fans to cover conveyers and rolls
Spray Pattern(s):
Fan
Flow Range:
.041 to 3.53 gpm
Typical Pressure Range:
30 to 100 psi
Angle Range:
65 - 120°
Common Materials:
Brass, 303, 316

Fan

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
5 psi 20 psi 40 psi 100 psi 200 psi 400 psi
NFV 0067 1/8″, 1/4″ 65°, 80°, 95° - .047 .067 .106 .150 .212
NFV 01 1/8″, 1/4″ 65°, 80°, 95°, 110° - .071 .100 .158 .223 .316
NFV 015 1/8″, 1/4″ 65°, 80°, 95°, 110° - .106 .150 .237 .335 .474
NFV 02 1/8″, 1/4″ 65°, 80°, 95°, 110° - .141 .200 .316 .447 .632
NFV 025 1/8″, 1/4″ 65°, 80°, 95°, 110° - .177 .250 .395 .559 .790
NFV 03 1/8″, 1/4″ 65°, 80°, 95°, 110° - .212 .300 .474 .670 .948
NFV 04 1/8″, 1/4″ 65°, 80°, 95°, 110° - .283 .400 .632 .894 1.26
NFV 05 1/8″, 1/4″ 65°, 80°, 95°, 110° - .354 .500 .791 1.12 1.58
NFV 06 1/8″, 1/4″ 65°, 80°, 95°, 110° - .424 .600 .949 1.34 1.90
NFV 07 1/8″, 1/4″ 65°, 80°, 95°, 110° - .496 .702 1.11 1.57 2.22
NFV 08 1/8″, 1/4″ 65°, 80°, 95°, 110° - .563 .797 1.26 1.78 2.52
NFV 10 1/8″, 1/4″ 65°, 80°, 95°, 110° - .707 .999 1.58 2.23 3.16

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

BJ

  • Interchangeable and alignable tips. Ideal for spray bars and the HydroPulse nozzle system
  • Interchangeable spray tips
  • Integral strainer available for maximum clog resistance
Nozzle Type(s):
Fan
  • Fan nozzles can provide a wide variety of lubrication coverage options from straight-jets for precise application points or wide fans to cover conveyers and rolls
Spray Pattern(s):
Fan
Flow Range:
.024 to 1.77 gpm
Typical Pressure Range:
30 to 100 psi
Angle Range:
65 - 120°
Common Materials:
Brass, 303, 316

Fan

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
5 psi 20 psi 40 psi 100 psi 300 psi 500 psi
BJ 0067 1/8″, 1/4″, 3/8″, 1/2″ 65° .024 .047 .067 .106 .184 .237
BJ 0077 1/8″, 1/4″, 3/8″, 1/2″ 73° .027 .055 .077 .122 .211 .273
BJ 01 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 95°, 110° .035 .071 .100 .158 .274 .353
BJ 0116 1/8″, 1/4″, 3/8″, 1/2″ 73° .041 .082 .116 .183 .317 .409
BJ 015 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 95°, 110° .053 .106 .150 .237 .410 .530
BJ 0154 1/8″, 1/4″, 3/8″, 1/2″ 73° .054 .109 .154 .243 .421 .543
BJ 02 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 95°, 110° .071 .141 .200 .316 .547 .707
BJ 0231 1/8″, 1/4″, 3/8″, 1/2″ 73° .082 .163 .231 .365 .632 .816
BJ 03 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 95°, 110° .106 .212 .300 .474 .821 1.06
BJ 0308 1/8″, 1/4″, 3/8″, 1/2″ 73° .109 .218 .308 .487 .844 1.09
BJ 0385 1/8″, 1/4″, 3/8″, 1/2″ 73° .136 .272 .385 .609 1.05 1.36
BJ 04 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 95°, 110° .141 .283 .400 .632 1.09 1.41
BJ 0462 1/8″, 1/4″, 3/8″, 1/2″ 73° .163 .326 .462 .730 1.26 1.63
BJ 05 1/8″, 1/4″, 3/8″, 1/2″ 65°, 80°, 95°, 110° .177 .354 .500 .791 1.37 1.77

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

HydroPulse

  • Features a pneumatic shut-off / clean-out. When coupled with a control system, these nozzles can reduce product waste by turning off and on when needed
  • Interchangeable spray tips
  • Pneumatic actuation for crisp on/off spray
  • Straight-through porting for series setup
  • Variety of mounting brackets available
Nozzle Type(s):
Fan
  • Fan nozzles can provide a wide variety of lubrication coverage options from straight-jets for precise application points or wide fans to cover conveyers and rolls
Spray Pattern(s):
Fan
Flow Range:
.177 to 5.30 gpm
Typical Pressure Range:
10 to 100 psi
Angle Range:
60 - 120°
Common Materials:
Nickel-plated Brass, 303

Fan

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
5 psi 20 psi 40 psi 100 psi 300 psi 500 psi
HP 05 1/8″, 1/4″ 65°, 80°, 95°, 110° .177 .354 .500 .791 1.37 1.77
HP 06 1/8″, 1/4″ 65°, 80°, 95°, 110° .212 .424 .600 .949 1.64 2.12
HP 0616 1/8″, 1/4″ 73° .218 .436 .616 .974 1.69 2.18
HP 077 1/8″, 1/4″ 73° .273 .546 .772 1.22 2.11 2.73
HP 08 1/8″, 1/4″ 65°, 80°, 95°, 110° .284 .568 .803 1.27 2.20 2.84
HP 0924 1/8″, 1/4″ 73° .331 .662 .936 1.48 2.56 3.31
HP 10 1/8″, 1/4″ 65°, 80°, 95°, 110° .353 .707 .999 1.58 2.74 3.53
HP 15 1/8″, 1/4″ 65°, 80°, 95°, 110° .530 1.06 1.50 2.37 4.10 5.30

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

NFD

  • The NFD series of flat fan nozzles has a dovetail joint that allows for easy maintenance and repeatable alignment
  • Interchangeable spray tips
Nozzle Type(s):
Fan
  • Fan nozzles can provide a wide variety of lubrication coverage options from narrow angles for precise application points or wide angles to cover conveyers and rolls
Spray Pattern(s):
Fan
Flow Range:
.174 to 10.9 gpm
Typical Pressure Range:
10 to 100 psi
Angle Range:
60 - 120°
Common Materials:
303, 316

Fan

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
5 psi 20 psi 40 psi 100 psi 200 psi 400 psi
NFD 050 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .174 .349 .493 .780 1.10 1.56
NFD 059 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .208 .416 .588 .930 1.32 1.86
NFD 077 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .273 .546 .772 1.22 1.73 2.44
NFD 097 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .344 .689 .974 1.54 2.18 3.08
NFD 12 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .438 .877 1.24 1.96 2.77 3.92
NFD 15 1/4″, 3/8″, 1/2″ 60°, 90°, 120° .521 1.04 1.47 2.33 3.30 4.66
NFD 20 3/4″ 60°, 90°, 120° .691 1.38 1.95 3.09 4.37 6.18
NFD 25 3/4″ 60°, 90°, 120° .877 1.75 2.48 3.92 5.54 7.84
NFD 31 3/4″ 60°, 90°, 120° 1.09 2.18 3.09 4.88 6.90 9.76

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

MPL

  • BETE's unique, clog resistant S-vane design gives the MaxiPass L the largest free passage available for a given flow rate, making it resistant to clogging, efficient, and reliable
  • Easily handles liquids with high particulate concentrations
  • High reliability spray performance under the most difficult conditions
  • Lower flow rates than MaxiPass series
Nozzle Type(s):
Whirl
  • Full cone nozzles can provide lubrication, cooling and remove chips & foreign debris during machining operations
Spray Pattern(s):
Full Cone
Flow Range:
.086 to 3.02 gpm
Typical Pressure Range:
10 to 80 psi
Angle Range:
75 - 135°
Common Materials:
Brass, 303, 316

Full Cone

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
10 psi 20 psi 40 psi 50 psi 60 psi 80 psi
MPL 0.21 1/8″ 77°, 129° .116 .156 .210 .231 .250 .283
MPL 0.30 1/8″ 86°, 134° .164 .221 .298 .328 .355 .401
MPL 0.42 1/8″ 90°, 128° .231 .312 .420 .462 .500 .566
MPL 0.57 1/8″ 92°, 127° .315 .424 .572 .629 .680 .770
MPL 0.77 1/4″ 90°, 125° .425 .573 .772 .850 .919 1.04
MPL 1.12 1/4″ 92°, 124° .616 .830 1.12 1.23 1.33 1.51
MPL 1.51 1/4″ 97°, 123° .832 1.12 1.51 1.66 1.80 2.03

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

MicroWhirl

  • Outstanding atomization
  • Optional safety wire hole available
Nozzle Type(s):
Whirl
  • Misting nozzles provide the low flow rates and fine atomization required for efficient, light lubrication applications
Spray Pattern(s):
Mist
Flow Range:
.008 to .380 gpm
Typical Pressure Range:
100 to 3000 psi
Angle Range:
1 - 120°
Common Materials:
303, 316

Mist

Select a nozzle number below for performance graph, drawings, and to request a quote.
Nozzle Number Connection Sizes Spray Angles gpm @ psi     (density: 1 SG)
100 psi 250 psi 500 psi 1000 psi 2000 psi 3000 psi
MW 085 1/8″, 1/4″, 3/8-24 70° .008 .013 .019 .027 .038 .047
MW 105 1/8″, 1/4″, 3/8-24 70° .010 .017 .024 .033 .047 .058
MW 125 1/8″, 1/4″, 3/8-24 70° .012 .020 .028 .040 .056 .068
MW 145 1/8″, 1/4″, 3/8-24 70° .014 .023 .032 .046 .065 .079
MW 195 1/8″, 1/4″, 3/8-24 70° .020 .031 .044 .062 .087 .107
MW 275 1/8″, 1/4″, 3/8-24 70° .028 .044 .062 .087 .123 .151
MW 695 1/8″, 1/4″, 3/8-24 70° .069 .110 .155 .219 .310 .380

These values are filtered based on search criteria or application and do not represent the full range of nozzles for this series. Click here to see all available series offerings.

XAEF

  • Available with a pneumatic shut-off / clean-out. When coupled with a control system, these nozzles can reduce product waste by turning off and on when needed
  • Air atomizing nozzle with external-mix design provides independent control of flow rate and drop size
  • Wide variety of hardware configurations
  • Available with clean out and shut off capabilities
  • Nickel alloy and other 300 series stainless steels available by request
Nozzle Type(s):
Air-Atomizing
  • Air-atomizing nozzles allow for low pressure operation while providing thin, even coatings
  • Ideal for low flow rates and higher viscosity coatings
Spray Pattern(s):
Fan
Angle Range:
60 - 90°
Common Materials:
Nickel-plated Brass, 303, 316