Spray Pattern Videos

Approvals and Certifications

BETE Fog Nozzle, Inc., one of the world's leading spray nozzle manufacturers, designs and manufactures
the highest quality Industrial Spray Nozzles

Application Intake Sheets

Custom Spraying Solutions

Washing the top of the tank  with Kynar LEM nozzles, and relying on run-down to rinse the bottom

Custom Solutions Bulletin 043

Application #060476

Industry:   Chemical Processing

Application:   Tank Washing

Product Description:   Special Kynar LEM 8

PDF version of this Bulletin (87 KB)

Back to Table of Contents

Situation:   A large chemical company contacted BETE with an unusual tank washing application. The customer wanted to clean just the top of the tank, and then rely on run-down to rinse the bottom. The tank was glass-lined so they did not want to use any Stainless Steel. The nozzle would need to be made completely out of PVDF. The tank diameter was 3' (0.9 m).

BETE's Solution:   BETE Applications Engineering specified a special LEM 8 with three TF8FC nozzles on the top of the customized manifold. There would be no nozzles in the bottom of the manifold. To allow the line to drain after operation, the manifold was designed with a 3/16" (4.8 mm) weep hole. The nozzle would operate at 40 psi (2.8 bar) for a 5 minute cycle time, providing a hard scrubbing spray in the top of the tank.

To discuss your fluid-related challenge, please contact BETE Applications Engineering at 413-772-0846 or appeng@bete.com.

[back to top]