Coating Nozzles
Apply thin coatings (wet or dry) on product moving past nozzles
Typical operating conditions for this application are listed for each nozzle
BJ
30-80 psi
4-7 bar
0.22-17 gpm
0.3-40 L/min
25°-80°
NF (S,D)
3.0-80 psi
2-5.5 bar
0.22-17 gpm
0.8-64 L/min
50°-120°
L
3.0-80 psi
3-7 bar
0.22-17 gpm
1-4 L/min
90°
PJ
60-1000 psi
4-7 bar
0.014-1.40 gpm
0.05-1.7 L/min
90°
SAM
10-15 psi
0.7-1 bar
0.44-19 scfm
0.8-7.2 Nm³/h
20°-70°
XA
20-60 psi
1.5-4 bar
2.9-70 gph
11-265 L/h
0.4-10 scfm
0.6-16 Nm³/h
20°