DESIGN FEATURES
Nozzles can be changed in seconds without tools
Three-part nozzle, base, gasket, and interchangeable tip
Exclusive ramped engagement for efficient, automatic alignment
Threaded adaptors will accommodate other standard BETE nozzles. Shut-off plugs are also available
Sanitary EZs are available with weld connection and no knurling
HOW IS THE SPRAY PATTERN ACHIEVED?
The spiral nozzle forms its spray pattern from fluid shearing off the turns of the spiral. The design of a hollow cone spiral produces drops that project outward, creating a ring-shaped spray with less coverage in the center. The full cone spiral design generates concentric hollow cones, producing two to three bands of medium-sized droplets surrounded by wider bands of relatively fine droplets, delivering complete coverage.
Produces the smallest droplet size compared to whirl nozzles of the same flow and pressure drop for fine atomization.
Available Spray Angles
60 - 180°
Flow Rate Range
0.494 to 58.4 gpm
Available Connection Types
- Pipe: 1/8, 1/4, 3/8, 1/2
- Connection Methods: Thread (NPT, BSP, Male, Female), Weld
Materials
Brass, 316
Flow Rates, Spray Angles, Connections
Full Cone
Select a nozzle number below for performance graph, drawings, and to request a quote.
Flow rate (gpm/lpm) is calculated at differential pressure (psi/bar).
Nozzle Number
Connection Sizes
Spray Angles
Flow Rate (gpm) @ Differential Pressure (psi) (Density: 1 SG)
5 psi
20 psi
40 psi
60 psi
100 psi
400 psi
0.494
0.988
1.40
1.71
2.21
4.42
0.919
1.84
2.60
3.18
4.11
8.22
1.41
2.83
4.00
4.90
6.32
12.6
2.12
4.24
6.00
7.35
9.49
19.0
2.86
5.72
8.10
9.91
12.8
25.6
3.76
7.51
10.6
13.0
16.8
33.6
5.84
11.7
16.5
20.2
26.1
52.2
Hollow Cone
Select a nozzle number below for performance graph, drawings, and to request a quote.
Flow rate (gpm/lpm) is calculated at differential pressure (psi/bar).
Nozzle Number
Connection Sizes
Spray Angles
Flow Rate (gpm) @ Differential Pressure (psi) (Density: 1 SG)
5 psi
20 psi
40 psi
60 psi
100 psi
400 psi
0.494
0.988
1.40
1.71
2.21
4.42
0.919
1.84
2.60
3.18
4.11
8.22
1.41
2.83
4.00
4.90
6.32
12.6
2.12
4.24
6.00
7.35
9.49
19.0
2.86
5.72
8.10
9.91
12.8
25.6
3.76
7.51
10.6
13.0
16.8
33.6
5.84
11.7
16.5
20.2
26.1
52.2
