EZTF QUICK CONNECT FULL CONE OR HOLLOW CONE SPIRAL NOZZLES

Interchangeable Nozzle Tips With Base and Gasket
Detail Full Cone Spray Pattern IconDetail of the Hollow Cone Spray Pattern Icon

DESIGN FEATURES

Nozzles can be changed in seconds without tools

Three-part nozzle, base, gasket, and interchangeable tip

Exclusive ramped engagement for efficient, automatic alignment

Threaded adaptors will accommodate other standard BETE nozzles. Shut-off plugs are also available

Sanitary EZs are available with weld connection and no knurling


HOW SPRAY PATTERN IS ACHIEVED

The spray pattern of the spiral nozzle is formed by the fluid shearing along with the turns of the spiral, which produce multiple concentric cones. These cones form 2 to 3 bands of relatively coarse droplets surrounded by wider bands of relatively fine droplets.

Produces the finest droplet size of any direct pressure nozzle for very fine atomization

Available Spray Angles
60 - 180°
Flow Rate Range
0.494 to 58.4 gpm
Available Connection Types
  • Pipe: 1/8, 1/4, 3/8, 1/2
  • Connection Methods: Thread (NPT, BSP, Male, Female), Weld
Materials
Brass, 316
Flow Rates, Spray Angles, Connections
Full Cone
Select a nozzle number below for performance graph, drawings, and to request a quote.
Flow rate (gpm/lpm) is calculated at differential pressure (psi/bar).
Nozzle Number
Connection Sizes
Spray Angles
Flow Rate (gpm) @ Differential Pressure (psi) (Density: 1 SG)
5 psi
20 psi
40 psi
60 psi
100 psi
400 psi
Pipe: 1/8, 1/4, 3/8, 1/2
60°, 90°, 120°, 150°, 170°
0.494
0.988
1.40
1.71
2.21
4.42
Pipe: 1/8, 1/4, 3/8, 1/2
60°, 90°, 120°, 150°, 170°
0.919
1.84
2.60
3.18
4.11
8.22
Pipe: 1/8, 1/4, 3/8, 1/2
60°, 90°, 120°, 150°, 170°
1.41
2.83
4.00
4.90
6.32
12.6
Pipe: 1/8, 1/4, 3/8, 1/2
60°, 90°, 120°, 150°, 170°
2.12
4.24
6.00
7.35
9.49
19.0
Pipe: 1/4, 3/8, 1/2
60°, 90°, 120°, 150°, 170°
2.86
5.72
8.10
9.91
12.8
25.6
Pipe: 1/4, 3/8, 1/2
60°, 90°, 120°, 150°, 170°
3.76
7.51
10.6
13.0
16.8
33.6
Pipe: 1/4, 3/8, 1/2
60°, 90°, 120°, 150°, 170°
5.84
11.7
16.5
20.2
26.1
52.2
Hollow Cone
Select a nozzle number below for performance graph, drawings, and to request a quote.
Flow rate (gpm/lpm) is calculated at differential pressure (psi/bar).
Nozzle Number
Connection Sizes
Spray Angles
Flow Rate (gpm) @ Differential Pressure (psi) (Density: 1 SG)
5 psi
20 psi
40 psi
60 psi
100 psi
400 psi
Pipe: 1/8, 1/4, 3/8, 1/2
60°, 90°, 120°, 180°
0.494
0.988
1.40
1.71
2.21
4.42
Pipe: 1/8, 1/4, 3/8, 1/2
60°, 90°, 120°, 180°
0.919
1.84
2.60
3.18
4.11
8.22
Pipe: 1/8, 1/4, 3/8, 1/2
60°, 90°, 120°, 180°
1.41
2.83
4.00
4.90
6.32
12.6
Pipe: 1/8, 1/4, 3/8, 1/2
60°, 90°, 120°, 180°
2.12
4.24
6.00
7.35
9.49
19.0
Pipe: 1/4, 3/8, 1/2
60°, 90°, 120°, 180°
2.86
5.72
8.10
9.91
12.8
25.6
Pipe: 1/4, 3/8, 1/2
60°, 90°, 120°, 180°
3.76
7.51
10.6
13.0
16.8
33.6
Pipe: 1/4, 3/8, 1/2
60°, 90°, 120°, 180°
5.84
11.7
16.5
20.2
26.1
52.2