MaxiPassTM (MP)
Maximum Free Passage Full Cone Nozzles
Open Printable Catalog Page - US units (PDF - 96 KB)
Open Printable Catalog Page - SI/Metric units (PDF - 468 KB)
Nozzle Selection Wizard
BETE Nozzles for Fire Protection (PDF - 25 KB)
Design Features of MaxiPass full cone nozzle
- Ultimate clog-resistant design with largest free passage available in a full cone nozzle
- Two unique S-shaped internal vanes allow free passage of particles
- High energy efficiency
- Easily handles dirty, lumpy liquids
- Male and female connections
- Flanged connection available
- High reliability spray performance under the most difficult conditions
Design pressure 20 psi; Spray pattern data varies with pressure. Please call us with any questions.
*The spray angle of wide and medium angle whirl nozzles is affected by increasing pressure. Contact BETE Applications Engineering when using the MaxiPass full cone nozzle above 40 PSI (3 bar).
Spray Angles: 30°, 60°, 90° and 120°
Flow rates: 0.7 to 978 gpm (2.6 to 3540 L/min). Flow rates up to 4500 gpm (17,000 L/min) available; call our Engineering Department for details)
 |
A cutaway view of the MaxiPass full cone nozzle showing the S-shaped vanes which enable the nozzle to successfully handle large particles without clogging |  A comparison of the free passage available with the BETE MaxiPass full cone nozzle compared to the free passage of a traditional full cone nozzle. The BETE MaxiPass full cone nozzle is designed to pass solid particles which are 2-3 times larger in diameter than particles that will pass through a traditional full cone nozzle. |
Full Cone 30°
(NN)
Full Cone 60° (N)
Full Cone 90° (M)
Full Cone 120° (W)
Custom MaxiPass Solutions:
Petroleum Processing: Wash Water Injection
Petroleum Processing: Light Cycle Oil (LCO) Quench of Hydrocarbon Gas Stream
Refining/Chemical Processing: Oil Quench in Ethylene Process
Chemical Processing: Deluge Cooling
Chemical Processing: Distillation Column Distribution
Petroleum Processing: Material Injection
Petroleum Processing: Injection Washing
Petroleum Processing: Material Injection
Petroleum Processing: Wash Water into Gas Stream