A BETE customer needed to inject water into the air intake of an engine to improve the efficiency of the combustion process. They require about 0.5 gpm (1.9 L/min) of droplets in the 100 micron range at a pressure of 90-100 psi (6.2-6.9 bar). Because of size constraints, the customer needed the nozzle to be physically small in size as well as wall-mounted to save on space.
BETE Applications Engineers worked with the customer's design and manufacturing personnel to overcome the dimensional and machining challenges to develop a special, wall-mounted L nozzle that met all of the customer's criteria. By using a wall-mounted nozzle, the customer's piping configuration was greatly simplified and fit into the close-quarters location with ease. This special L nozzle flowed at 0.44 gpm (1.67 L/min) and produced 50 micron droplets, which was significantly smaller than the customer maximum of 100 microns, thus resulting in more rapid evaporation of the droplets.
To discuss your fluid-related challenge, please contact BETE Applications Engineering at 413-772-0846 or email@example.com.