Tank Washing Spray Nozzles

Custom Solutions Bulletin 062
Application #062006
Industry: Chemical Processing
Application: Tank Washing
Product Description: Chemical-resistant Tank Washing Nozzle


BETE Applications Engineers received an inquiry from a BETE customer who had an 8' (2.5m) glass tank he needed cleaned. The tank normally held liquid with a high concentration of hydrochloric acid (HCl). The system was to be a Clean-in-place (CIP) system, which meant the nozzle would always be in the tank. The system was washed with 200 °F (93 °C) de-ionized water. The available opening into the tank was only 2" (50 mm) in diameter.


To be compatible with the hydrochloric acid, either a plastic or a nickel alloy (Hastelloy or Inconel) would have to be used. Since the wash water was 200 °F (93 °C), which is too high to comfortably use plastics, Hastelloy was selected. A TW1 was selected for its compact size that allowed it to fit through the 2" (50 mm) opening on the tank. Because BETE utilizes its own investment casting facility, a small run (two, in this case) of unique materials is not difficult at all. The nozzles were quoted, cast, and sent within four weeks, the standard lead time for our production facility.

To discuss your fluid-related challenge, please contact BETE Applications Engineering at 413-772-0846 or appeng@bete.com.