HydroPulse® Food-Grade Electrically Actuated Automatic Precision Spray Nozzles

BETE’s electric-actuated Hygienic HydroPulse Spray Nozzles assure precision volumes of expensive ingredients are sprayed directly onto your food processing target, with overspray waste virtually eliminated. Pair with the BETE® FlexFlow™ Precision Spray Control System to achieve uniform coverage, even if you adjust your conveyor speed.

REQUEST INFO

Food Processing Benefits

  • Control a wide range of flow rates
  • Even and uniform application
  • Reduce consumption of expensive coatings
  • Reduces overspray waste and improve product quality
  • Exact target coatings secure a clean and safe environment
  • Promote increased production
  • Reduce maintenance and downtime
  • Reliable spray dosing provides an accurate calorie count

Electric HydroPulse (EHP) spray nozzles do not require a compressed air source and are capable of cycling on/off up to 150 cycles per second. These features afford the option of using high-frequency cycling known as Pulse Width Modulation (PWM) to vary the liquid spray flow rate at constant supply pressure with little change in spray performance by adjusting the duty cycle. When the spray cycles at a high enough frequency, coverage uniformity is maintained because the duration between pulses of spray is short enough to ensure there are no gaps in the spray coverage.

 
  Liquid  inlet connection   1/8", NPT or BSPT; or 1/2" tri-clamp  
  Maximum liquid flow rate   1.0 GPM
  Maximum rated pressure   250 PSI
  Thermal insulation class   F (155°C / 311°F)
  Power   9.4W @ 24VDC
  Electrical connector   M8 3-pin
  Maximum cycle frequency     150 cycles/sec
  Nozzle construction

  Stainless steel wetted components,
 Food-Grade Viton® (FKM) seals, hygienic design  

  Interchangeable BJ, BJH, and CW nozzle tip options.

Resources: